Exterior Insulation Plaster With Better Quality Around Your View full size
EXTERIOR INSULATION PLASTER
Exterior Insulation is a container full Sivas. Low speed (75 rpm) butterfly mixer fitted with a drill. Stirred at 5 seconds. On 10 Lt. water is added and 3 i, l is stirred from 4 minutes. Dunn urine drill mixer speed to show excellent performance should be 75 cycles. insulation plaster mixed with a trowel applied to the wall. To properly gauge the blade surface using a plaster is leveled. Insulating plaster is made of 10 mm thick. 6 cm thick single layer is applied alone. If the application is made to be administered 3 hours ikincş times more than 6 cm thick. application is made after application of decorative plaster finishes 48 of tissue option. paint is applied after the application of decorative plaster. (Insulation plaster surface dry after 3 days because the dry paint is applied from the outside inward.)
SCOPE OF APPLICATION
Brick, aerated concrete, pumice, brick, concrete walls and heat, sound, water and fire is used as plaster, lime and plaster easily applied in the field.
The application surface mold oil, dust, paint, dirt and so on. hold must rid agents. Aerated concrete and concrete surfaces should be taken from spreading moistened before üzerine0,3 mm outer insulation plaster. After approximately 12 hours after spreading thrown Exterior Insulation Plaster hardening of the required thickness: to be passed.
Ambient temperature during the application must be considered to be between +5 and +35 C. within 24 hours or face being frozen melt should not be applied on surfaces with a risk of frost.
Exterior Insulation Plaster provides 80% higher thermal insulation. Our product because it applied plaster thermal bridge oluşturulmazç A-1 class does not light, breathable as our moisture due to the high breathability of the thrust load on the building with light structure 0 block non-harmful to people and the environment, heat, sound, water, fire, mold and fungus formation a human and environmentally friendly insulation material that prevents 0.
Motorbike and exteriors of brick, aerated concrete, pumice, briquette wall and so on. Applied to the surface adhesion and providing good practices available, in not ever contain chemicals, human and environment ever created, supported by an injury is not completely natural ingredients, heat, sound, cement-based natural and the artificial pozzolan those supplements was produced hand plastering tool that provides water and fire insulation is an ecological insulation plaster can be applied to prevent moisture.
1.670 g cm2 consumption (for 1 cm thick) on a flat surface
Warnings: Any material plaster of insulating plaster, lime, cement or chemical should definitely attend. by adding dry or wet materials should be reused. Avoid inhalation, eye contact, rinse with plenty of water, seek medical advice if necessary. Is a cement-based material, gloves should be used during application. Packaged products should be stored in a humid environment.