Humidity and Mildew Preventive owner of Quality Insulation Plasters
MOISTURE AND MOLD ANTI-INSULATION PLASTER
Riyam Moisture and Mold Prevention of insulating plaster all over poured into Riyam mixing machine and joins 9-10 liters of water. It stirred between 3 to 4 minutes. minimum 1cm thick with a trowel thrown thrown spreading the mixed material surfaces. After filling the interim lathes with a trowel, gauge drawing surface is corrected. topcoat application can be made minimum 24 hours on the product. In the last coat to get results from the product used Moisture and Mold Prevention recommended Riyam next Insulation Plasters Cement-based Ecological Satin must be used.
SCOPE OF APPLICATION
Brick, aerated concrete, pumice, brick, concrete, walls, damp and mold may occur on all surfaces.
The application surfaces, mold oil, dust, paint, dirt, etc. must be free from substances preventing adhesion. Aerated concrete, pumice, materials like bricks in hot weather should be moistened before application. Surface smoothness and brightness of the gross concrete surfaces, Riyam concrete primer should be applied. After the primer has dried Riyam Moisture and Mold Prevention Insulation Plaster application is started
APPLICATION REQUIREMENTS AND SURFACE
On gross concrete surfaces should be taken in advance of concrete lining. Brick, aerated concrete, pumice, brick walls and concrete surfaces coated linings Riyam Moisture and Mold Prevention Insulation Plaster can move on from a minimum of 1 cm should be discarded after 24 hours Riyam Cement-based Ecological Satin application.
Riyam Moisture and Mold Prevention Insulation Plaster aerated concrete, brick, pumice, applied in brick and concrete surfaces, adhesion, and enables convenient application available, in chemical-free, has been created from the not harmful to humans and the environment natural ingredients. Riyam Moisture and Mold Prevention insulation plaster, cement-based, fortified those natural and artificial pozzolan, ecological and hygienic plaster prevents moisture insulation.
3.5 kg 1 m² consumption (for 1 cm thick) on a flat surface
In the original packaging in dry and moisture-free environment for 12 months, it must be used within 10 days after opening the bag.
Warnings: Moisture and Mold Prevention Riyam into the Surface Insulation, any material, gypsum, lime, cement or chemical should definitely attend. Expired should not be used again by the addition of dry or wet materials. places or move different materials that may be in place, before the application of plaster nets should be used. Do not exceed the specified application and instructions for use, your breathing, eye contact, rinse with plenty of water, seek medical advice if necessary. Gloves should be worn during application is a cement-based material. Packaged products should be stored in a humid environment.